Carbon block replacement water filter cartridges for taste & odor removal

Taste & Odor Removal Cartridges

High Performance Carbon Block – 5 Micron

Point of use filtration for good tasting, crystal clear water - Reduces chlorine, chemicals, dirt, rust, sediment and silt.

Keystone's HPT™ cartridges combine the highest chlorine reduction capacity with the lowest pressure drop for excellent taste and odor control.

Engineered using the finest coconut shell activated carbon, HPT cartridges are made to the highest standards of the Water Quality Associations's Gold Seal Program.

These cartridges feature:

Longer life

Higher flow

Lower pressure drop

Sizes to fit Keystone and comparable standard diameter housings

CARTRIDGE #	DESCRIPTION/USE	SIZE	CHLORINE CAPACITY
HPT-5	Single Faucet	1/2	>12,000 gal @ 1.0 gpm
HPT-10	Single Faucet (Kitchen)	Full	>12,000 gal @ 1.0 gpm
HPT-20	Single Faucet (High Capacity)	Double	>12,000 gal @ 1.0 gpm

Specifications
CARTRIDGE NUMBER	MICRON RATING	MAXIMUM OPERATING TEMP °F (°C)	PRESSURE	CARTRIDGE SIZE (IN.)	INITIAL PRESSURE DROP@FLOW	FILTER WEIGHT
HPT-5	5	125° F	150	4.875x2.75	0.75psid @ 1.0gpm	.5 lb.
HPT-10	5	125° F	150	9.75x2.75	0.75psid @ 1.0gpm	1.0 lb.
HPT-20	5	125° F	150	20.0x2.75	0.75psid @ 1.0gpm	2.0 lb.

Warnings
Operating conditions can change performance. Actual results will vary depending on combinations and amounts of organic contaminants, changes in pH or other conditions encountered in actual use.
Use Keystone filters only with microbiologically safe water.
All information presented here is based on data believed to be reliable. It is offered for evaluation and verification, but is not considered to be a warranty of any kind.

Keystone Filter Division
2385 North Penn Road
Hatfield, PA 19440
Toll Free: 1-800-822-1963
Fax: 215-997-1839
E-mail: filters@keystonefilter.com